Send Email
Send SMS
Toss Weldtronics

Home » Products »


Offering you a complete choice of products which include mig- a twist welding torch and tig torches.

MIG- A Twist Welding Torch


MIG- A Twist Welding Torch
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
FinishingPowder Coated
Current Output150 to 550 A
Torch TypeWelding torch
Fuel Gas TypeOxy-Acetylene

MIG- A Twist Welding Torchnew patented welding torch with unprecedented ergonomics and flexibility. The design of MIG-A Twist fits naturally in with Migatronic's characteristic design of welding machines and control panels.

Welding quality and user-friendliness will always be the focus parameters the better welding tool, the better workmanship.

The result is an innovative range of welding torches with both visible and tangible advantages at all levels. Operation, flexibility, user-friendliness, ergonomics, selection of material, surfaces ... you name it, MIG-A Twist has got it! Definitely the most complete range of welding torches for MIG welding in a user-friendly match with the control panel of the welding machine.

Invented by Migatronic
All MIG-A Twist torches are equipped with a patented Migatronic novelty that finishes with the disadvantages of the traditional turnable swan neck. There are no worn O-rings and no risk of leaks; still the free movability of the swan neck is fully intact. MIG-A Twist has turned the principles upside down the handle is turned around the swan neck - rather than the other way round.

Correct working posture turn the swan neck, not your hand
MIG-A Twist is the optimal choice for varying welding positions. Turn the swan neck (read handle) to the desired position - this is easily done without tools. Whichever welding angle you use, your working posture is always ergonomically correct.

Aircooled torches can be turned up to 90 Degree in both directions, watercooled torches up to 45 Degree. Both types are turned step-by-step at intervals of 15 Degree.

A wide range of choice
MIG-A Twist is available in not less than 60 different configurations covering every need, water-cooled or air-cooled, ranging from 150 to 550 A. There is also a complete range gas nozzles, swan necks, gas diffusers and liners.

MIG-A Twist is equipped with a newly developed trigger with a soft bottom stop and changeover between short and long travel. At the top of the handle it is possible to mount/remount three different modules a module without control, a module for stepless current adjustment, and a module with a free choice of two, three, four or seven sequences in fixed clicks. The MIG-A Twist can be configured according to your current need.

MIG-A Twist - quality in every detail
No expenses spared; a unique product down to the minutest details, made of the best materials and with built-in flexibility. The quality is underlined by the ergonomic design with softgrip on the handle, new soft hoses and cable relief. Take the MIG-A Twist in your hand and feel the difference.

Yes! I am interested

TIG Torches


TIG Torches
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Pole plug6 or 7
Length of cable4 or 8 m
Torch TypeWelding torch, Cutting torch
Fuel Gas TypeOxy-Acetylene

The new range of TIG Torchesconsists of four families the air-cooled TIG 101, TIG 201 and TIG 301 and the water-cooled TIG 301, TIG 401 and TIG 451. From the small, lightweight TIG 101 to the TIG 451 which is designed for high-performance TIG welding with high duty cycle and up to 400 A DC welding current.

Migatronic TIG ERGO - new ergonomically designed welding torches
Being a total supplier of welding equipment, Migatronic also develops and produces welding torches.

Quality demands increase as welding technology improves the possibility of communication between torch handle and welding machine and as the individual welders increase their expectations for operational comfort, ergonomics and user-friendliness.

The 50 variants differ in current intensity, flexible torch body, length of cable (4 or 8 m). 6 or 7 pole plug and choice of built-in control unit in the torch handle.

Handle with softgrip
In the new design, ergonomics, flexibility and reliability have been brought into focus. The torch handle is available in two sizes, both of which have ball and socket joint relief and softgrip on the sides of the handle for safe, pleasant grip.

The first 80 cm of the cable from the handle have a leather cover which, combined with the ball-and-socket joint relief, gives optimum flexibility, even in difficult-to-access places. At the same time the leather cover increases the wearability of the welding torch.

The Migatronic TIG ERGO range is designed for two optional control units a keypad unit or a unit with both keypad and control knob that allows communication of current control directly from the torch handle to the welding machine. You make the choice upon purchase of the torch but the unit is easily replaced later.

Migatronic TIG Adjust provides full 360 degree-of-freedom!
TIG Adjust is designed for welding operations where repeated adjustments of the torch body are an everyday occurrence and use of conventional torches is physically impossible.

The outermost part of the torch body can be turned in any direction and has almost unlimited life as opposed to a standard Flex torch.

The air-cooled or water-cooled TIG Adjust can be equipped with two different size torch bodies. The torch bodies can be equipped with standard wearing parts. For the small torch body, standard wearing parts from the TIG 101-301 range can be used. For the large torch body, standard wearing parts from the TIG 201-401 range can be used.

All wearing parts for these models can be used for TIG Adjust without limit. TIG Adjust is supplied without wearing parts as standard.
Yes! I am interested

TIG Torches


TIG Torches
  • TIG Torches
  • TIG Torches
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Wire diameter0.8-1.2 mm
Duty cycleCO2 60%, 250 A
Total weight4 m, 4.8 kg
Cable25 mm2
Weight1.4 kg
ModelML 240 MigAir

Apart from our prize-winning MIG-A Twist torch and our TIG torches, we also have a selection of various torches for specific use.


Fume extraction and ergonomics in the welding torch
As a consequence of the increased demand for better working environment, Migatronic has developed a complete range of air-cooled and water-cooled welding hoses in 4 m and 5 m lengths with possibility of effective fume extraction.

ML 240 - MV 400 FKS is always supplied with separate tip adaptor and central connection

ModelML 240 MigAirMV 400 FKS MigAir
Duty cycle:
CO2 60%250 A
CO2 100%400 A
Mixgas 60%220 A
Mixgas 100%350 A
Min. flowrate
Water cooling 1 bar
-1 l/min.
Max. pressure (water)-5 bar
Max. water temp.-70 DegreeC
Gas flow +/- 5%10-20 l/min.*10-20 l/min.*
Wire diameter, mm0.8-1.20.8-1.6
Cable mm22516
Weight1.4 kg1.7 kg
Total weight kg, 4 m4.8 kg4.9 kg
IEC 60974-7
IEC 60974-10

Minimum gas flow for compliance with maximum performance.
We reserve the right to make changes.
Yes! I am interested


Explore More Products

Contact via E-mail
Contact via SMS
Toss Weldtronics
Sachin Deshmukh (Manager)
Sector No. 21, S. C. H. No. 6, Building No. 17, Flat No. 6 Yamunanagar, Nigdi, Talwade,
Pune - 411044, Maharashtra, India
Call Us: 
Call Response Rate: 84%
Share Us :

Home  |   Profile   |  Products  |  Site Map  |   Contact Us

© Toss Weldtronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Toss Weldtronics