TOSS WELDTRONICS

Additional Information:

• Item Code: IK-92-Puma

• Cutting Capacity
• Carriage Travel
• Gas Distribution and torches
• Controls

Details

Rail span (standard)

The Auto Picle S Portable Pipe Cutting Machine for Large Pipesis a motorized oxy-fuel pipe cutting machine with remote control. The special fixed rail for the torch/tip guidance system provides high cutting accuracy and makes the Auto Picle-S ideally suited for large pipes. The Auto Picle-S is portable and easy to set-up just about anywhere.

• Motorized Oxy Fuel Pipe Cutter
  Automatically bevel cuts or straight cuts steel pipe
• Remote Controlled
  Operate machine away fromcutting area to avoid sparks
• Optional Guide Rail
  Cuts up to 2400mm (94in) inch diameter of pipe accurately; use for cutting pipe vertically
• Interlocking Chain Links
  Add or remove chain as needed to cut smaller or larger pipe
• On/Off Drive Clutch
  Position machine and align machine quickly
• High-Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts

Part#ZM33388 Includes Machine, Chain, and Torch Holder
Call Customer Service for pricing at 585-492-2400, extension 440.

The Auto Picle P Plasma Pipe Cutting Machinetype is a remote control plasma pipe cutting machine. The portable plasma pipe cutting machine is designed to use plasma for high-speed cutting of carbon steel, stainless steel, aluminum and other metals. The machine allows accurate bevel cutting of pipe and straight cut off of pipe in or out the field.

The optional guide rail provides high cutting accuracy and makes the Auto Picle P -S Type plasma pipe cutting machine particularly suitable for large pipes. Countless professionals from fabricators and scrap yards to boiler makers and tank manufactures have used Koike pipe cutting machines products successfully.

• Guide Rail
  Cuts up to 2400 mm (94 inches) diameter of pipe accurately; use for cutting pipe vertically
• Motorized Plasma Pipe Cutter
  Automatically bevel cuts or straight cuts steel pipe
• Plasma Cuts Bevels
  Provides a clean cutting surface
• Remote Control Pendant
  Operate machine away from cutting area to avoid sparks
• Special Fixed Rail Tip Guide System
  Provides for high cutting accuracy
• Interlocking Chain Links
  Swiftly adapts to any pipe diameter
• On/Off Drive Clutch
  Position and align machine quickly
• Optional Snap Valve
  One-touch on/off a gas valve

Additional Information:

• Packaging Details: BOX

The Portable Oxy Fuel Cutting Machine, IK-12 Beetle is an affordable, portable, oxy-fuel cutting machine. It is known around the world as one of the best portable cutting machines in the industry. This portable gas cutting machine can be used with one or two oxy-fuel torches, has a solid aluminum body and can perform straight line cutting, circle cutting, and bevel cutting.

• Multiple Use Oxy-Fuel Machine
  Performs high quality straight, circle and bevel cuts; single model includes 1 torch and 3 tips.
• Stepless Drive System
  Maintains constant travel speed even with high temperatures ensuring stable, trouble-free cutting
• Light Weight - 9.5 kgs (20.9 lbs)
  Easy to carry and use yet rugged enough to be a true workhorse
• Use on Radiagraph Track
  Possible replacement for discontinued Radiagraph; user can use existing track
• Extendable 72in (1800mm) Track Sections
  Cut longer parts
• High-Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts
• Optional Snap Valve
  One-touch on/off the gas valve

Additional Information:

• Item Code: IK-12-Beetle

A Precision, Quality Constructed, Hard-working Oxy Fuel Cutting Machine isCompact and simple to operate, this machine excels at repetitive work, continuously producing accurate flame cuts by following a steel template. IK-54D Portable shape cutting machine economically cuts all desired shapes.

• Oxy-fuel Pattern Cutter
  Shape cut steel parts.
• Ball Transfer Base
  Allows easy positioning of the unit on the plate.
• Auto Start Cutting Oxy ValveStart or stop machine motion with cutting oxygen valve.
  3-Part Body ConstructionBody consists of the pantograph, jaw and magnetic tracing system mounted on upper jaw with torch mounted on lower jaw; template fitting arm assembly and stand complete the construction.
• Magnetic Roller
  25/64 in (10mm) diameter standard roller follows shape of steel template fixed to template holder and accurately guides torch; 6, 8,15 and 20 mm available and allows various cut sizes with same template.
• Stable Cutting Speed
  PWM control system ensures stable cutting speeds.
• Circle Cutting Option
  Cut circles without a template 2.4 - 16 in (60-400mm) diameter.
• Cut Around Base of Machine
  For larger part cutting.
• Light Weight
  72.5 lb (33 kg), easy enough to carry just about anywhere.
• High Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts.

Additional Information:

• Item Code: IK-54D

The Portable Plasma Oxy-Fuel Cutting Machineuses standard pitch torch holder for use with most plasma systems using remote pendant supplied by the plasma manufacturer.

Plasma Kit consists of

• IK-12 Max3 S-type HS (high speed) unit
• Bar Holder
• Cross Bar
• Torch Roller Bar Bracket
• Pinion Plasma Torch Holder 1 3/8 in

This unique Precise and Easy Automatic Hole Pipe Cutterfrom Koike Aronson is ideally suited for cutting high precision T-joint circles including any hole that crosses the side of the pipe for piping systems, high-pressure vessels, and heat exchangers.

Developed with Koike Advanced Technology, the KHC-600D is a compact design that is lightweight and easy to operate.

In addition to cutting circles and bevel in the flat plate, the machine can cut a vessel from the inside or outside.

• Automatic Oxy Fuel Pipe Cutter
  Automatically bevel cuts or straight cuts holes into the pipe
• H-Lever Handle
  Torch automatically maintainstip to work distance based on trigonometry function of H- Lever; very easy to set up with just two adjustments
• Rotating Gas Manifold
  Keeps hoses from becoming Tangled Automatic Tip Stand Off -Ensures higher accuracy during bevel cutting
• On/Off Drive Clutch
• Position cutting tip accurately and quickly
• Flat Circle Bevel Cutting
• Can be used to cut circles in flat plate with a bevel edge
• High Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts.

Additional Information:

• Item Code: KHC-600D

The rugged construction of the Semi-automated Oxy-fuel Circle Cutting Machineis designed for quality flame cutting circles in a wide range of sizes. Operational versatility, ease and economy have all been built into this precision machine.

• Oxy Fuel Circle Cutter
  Bevel or straight cut circles and holes; cut circles from 1-3/16" to 40" diameters
• Rotating Gas Manifold
  Keeps hoses from becoming tangled
• Vertical Adjustment
  Crank handle quickly sets tip to work piece distance
• Larger Version of Cir-Cut
  Cuts larger circles and holes
• Flange Cutting Option
  Makes flanges in one pass.
• High Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts.

Additional Information:

• Item Code: IK-70

We are offering Portable Circle Bevel Cutting Machineto our clients.

Cir-cut I (Permanent magnet type)
Part# ZA4201102 Includes three (3) cutting tips for users fuel gas

Cir-cut II (Electromagnet type for vertical use)
Part# ZA4201104 Three (3) cutting tips for users fuel gas

• Oxy Fuel Circle Cutter
  Bevel or straight cut circles or holes
• Rotating Gas Manifold
  Keeps hoses from becoming tangle
• Electro or Permanent Magnet
  Holds machine to surface; electromagnet allows use on vertical surface
• Large Carrying Handle
  Makes this portable machine easy to carry and set-up
• Moving Center
  No melting loss of center with extremely small circles as center retracts
• Excellent Cutting Capability
  Cut circle diameters ranging from 40 mm - 200 mm (1-9/16 to 8 in) cut in plates with a thickness extending up to 30 mm (1-3/16); beveling from 0 Degree - 45 Degree possible.
• High-Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts.
• Lightweight, Compact and Easy to Carry

This manually operated Portable Pipe Cutting Systemuses a chain and gear drive system. The drive chain is comprised of durable, interlocking links that can easily be added or removed for quick change of pipe diameters. A graduated bevel collar ensures accurate bevel setting. The control valves for fuel, preheat oxygen and cutting oxygen are positioned away from heat yet conveniently placed for easy operator use.

• Oxy-Fuel Pipe Cutter
  Bevel cut or straight cut steel pipe
• Manually Operated
  No power/electricity needed to cut pipe; ideal for field use
• Interlocking, Unique Chain System
  Add or remove links as needed for various size pipes; 114-600mm (4-24in) diameters possible with standard chain
• Lightweight
  At only 9kg (19.8 lbs) this unit is easy to carry, operate and maintain
• Worm Gear Drive
  Low gear ratio ensures extremely smooth travel
• Optional Snap Valve
  One-touch on/off gas valve
• Very low maintenance
• High Quality Oxy-Fuel Cutting Tips
  Koike's superior design Series 100 torch tips are included to ensure fast, smooth cuts.