Approx. Rs 18.5 Lakh / UnitGet Latest Price
Product Details:Phase | Three Phase |
Technology | CNC technology |
Machine width | 4,000 mm to 6,000 mm (in steps of 500 mm) |
Cutting width | 3,100 mm to 5,100 mm |
Runway length | Up to 50,000 mm (in steps of 3,000 mm) |
Positioning speed | Up to 56 m/min. |
Details
Y-axis drive system
Dual-side rack & pinion | |
X-axis drive system | Linear guide |
Effective cutting width | 3,000 / 3,500 / 4,000 / 4,500 / 5,000 mm |
Gantry span | 4,000 / 4,500 / 5,000 / 5,500 / 6,000 mm |
Rapid speed | Std. 28,000 mm/min Opt. 56.000 mm/min |
Cutting speed | 6,000 mm/min |
Multiple torch positioning system | Steel band (Mirror available) |
Hose/Cable Transfer | Cable chain |
Oxy-fuel torch | Max. 8 |
Plasma torch | Max. 2 |
3D-Link Plasma Bevel | 1 |
Gas control system | Servo gas control |
Auto ignition | Optional |
Motorized torch riser | Optional |
Water spray | Optional |
CNC control | Fanuc 300i/310i |
Approx. Rs 3.2 Lakh / UnitGet Latest Price
Product Details:Controller | CNC Controller |
Material Of Construction | MS |
Table Design | Downdraft Table Design |
Motor Type | Servo Motor |
Finishing | Polished, Powder Coated |
Packaging Type | Boxes |
The Monograph Extreme A CNC Plasma Cutterdesigned to deliver many years of reliable performance and efficient production. It features a unitized downdraft table design, keeping the overall footprint as compact as possible, thus maximizing your production space. This design allows the operator full view of the cutting operation. Maximum fume extraction is achieved with the deep design of the downdraft table.
Equipped with either a Hypertherm's EDGE Pro Ti CNC and Integrated Sensor Ti Torch Height Control or Flashcut Titanium CNC and Flashcut Stingray Plasma Height Control, this machine allows ease of use for any operator. It's sturdy design and low backlash planetary gearboxes allow this single side drive machine to deliver premium motion and accuracy.
Approx. Rs 3.1 Lakh / UnitGet Latest Price
Product Details:Material | MS, CS |
Main Roller Diameter | 12 inch |
Traverse Speed | 1400 IPM |
Power Requirement | 480/3/60 @ 30 Amp |
Weight | 37 kg approx |
Number of oxy fuel torches | Up to 16 oxy-fuel torches |
The Versagraph Extreme A Plasma Cutting Machineis an extra heavy-duty, gantry, a thermal cutting machine using the latest design methods such as Finite Element Analysis (FEA) to assure this machine can operate in the most challenging environments. The Versagraph Extreme series utilizes the latest technologies to provide unmatched speed, accuracy, versatility, reliability and durability in a thermal cutting machine.
The Versagraph Extreme can be fully customized to fit your production needs and increase your productivity. Multiple plasma stations, oxy-fuel stations, marking options as well as full contour plasma beveling, which is controlled through a very easy to use operator interface. Steel Service Centers, Heavy Fabricators, Equipment Manufacturers, and Shipbuilders are just a few of our markets.Approx. Rs 3.4 Lakh / UnitGet Latest Price
Product Details:Material Of Construction | MS |
Wastage Reduction | By 30% |
Traverse Speed | Up to 1000 inches per minute |
Cutting Material | MS, Armor Plate, SS, Aluminum and more |
Current Requirement | 130 amp to 260 amp |
Cutting Material Thickness | 1 inch (25 mm) |
Finishing | Polished, Powder Coated |
The Supergraph IV Unitized CNC Plasma Cutting Machinewill boost your shop's productivity and consistency while reducing material waste by as much as 30%. With a high traverse speed, you have the ability to maximize production without the loss of floor space. The compact design of the Supergraph IV also enables it to be easily moved and set up at a different location. This is truly a high powered, compact KOIKE CNC plasma cutting machine.
The Supergraph IV is one of a KOIKE's CNC plasma cutting machine able to cut
This machine is packed with exciting features and benefits ready to increase efficiency, quality and your bottom-line profitability.
Approx. Rs 3.4 Lakh / UnitGet Latest Price
Product Details:Material | MS, CS |
Application | Plasma Cutting Machine |
Finishing | Polished, Powder Coated |
Carriage Band Material | SS |
Packaging Type | Boxes |
Phase | Single, Three phase |
Mastergraph Extreme Plasma Cutting Tablemachine posses a host of features and new technologies created by Koike Aronson's experienced Engineers.
High torque and high resolution have been engineered into this design to accommodate improved plasma bevel cutting technologies. It is equipped to handle your job requirements and is flexible enough for adaptation to future process requirements.
This plasma cutting machine is the perfect fit to increase production and save time for industries within the
In addition, this plasma cutting table is packed with exciting features and benefits ready to increase efficiency, quality and your bottom-line profitability. Koike Aronson has created a new world standard in thermal cutting machines. The Mastergraph Extreme utilizes the latest technologies to provide unmatched speed, accuracy, versatility, and durability in a thermal cutting machine. Designed to satisfy the world's most demanding customer requirements, the Mastergraph Extreme plasma bevel cutting machine has been engineered to provide the power needed for today and the flexibility for tomorrow.
Approx. Rs 3.5 Lakh / UnitGet Latest Price
Product Details:Automation Grade | Semi-Automatic |
Traverse Speed | 1400 IPM |
Power Requirements | 480/3/60 @ 30 Amp |
Motor Power | 6 HP |
Approx Weight | 37 kg |
Frequency | 50 Hz/ 60 Hz |
Application | Industrial, Commercial |
TheMastergraph EX2 CNC Plasma / Oxyfuel Cutting Machineuses the latest technologies to assure it can operate in the most challenging environments. The Mastergraph EX2 series provides unmatched speed, performance, reliability, and flexibility in a thermal cutting machine.
The Mastergraph EX2 can be fully customized to fit your production needs and increase your productivity. Multiple plasma stations, oxy-fuel stations, marking options as well as full contour plasma beveling, which is controlled through a very easy to use operator interface. The Mastergraph EX2 provides the ultimate solution for Steel Service Centers, Heavy Fabricators, Equipment Manufacturers, and Shipbuilders are just a few of our markets.
Standard Equipment
Approx. Rs 3.6 Lakh / UnitGet Latest Price
Product Details:Cutting Technology | Plasma or Oxy-fuel |
Mounting Type | Floor Mounting |
Control System | CNC Control |
Material | MS, CS |
Finishing | Polished, Powder Coated |
Packaging Type | Boxes |
The Plate Pro Extreme utilizes the latest technologies to provide unmatched speed, accuracy, versatility, and durability in a thermal cutting machine. Designed to satisfy the world's most demanding customer requirements, the Plate Pro Extreme has been engineered to maximize its' performance while costing so little. Steel Service Centers, Heavy Fabricators, Tank Manufacturers, Shipbuilders, and General Fabricators are just a few of the Plate Pro Extreme target customers.
Approx. Rs 2.1 Lakh / UnitGet Latest Price
Product Details:Material | MS, SS |
Cutting Material Width | 5 or 6 foot |
Cutting Material Length | 10 or 12 foot |
Cutting Material Thickness | Up to 2 inches |
Warranty | 2-year |
Finishing | Polished, Powder Coated |
The Plate-Fab Plasma/Oxy-fuel CNC Cutting Machinefrom Koike Aronson, Inc. is a unitized design incorporating a downdraft or water cutting table. Engineered for increased precision and more options at a lower cost the Plate-Fab can be configured to cut plates sizes 5 or 6 foot wide by 10 or 12 foot long and up to 2 inches thick steel.
Approx. Rs 3.42 Lakh / NOSGet Latest Price
Product Details:Model | PICLE-S |
Brand | Koike |
Material | MS |
Cutting Diameter | Up to 2400 mm (94in) inch |
Power source | Oxy - Fuel |
Cutting direction | Vertically Interlocking Chain Links |
Finishing | Polished, Powder Coated |
The Auto Picle S Portable Pipe Cutting Machine for Large Pipesis a motorized oxy-fuel pipe cutting machine with remote control. The special fixed rail for the torch/tip guidance system provides high cutting accuracy and makes the Auto Picle-S ideally suited for large pipes. The Auto Picle-S is portable and easy to set-up just about anywhere.
Features & BenefitsApprox. Rs 16.5 Lakh / UnitGet Latest Price
Product Details:Cutting speed | 6 m/min |
Rapid traverse speed | 54m/min |
Marking speed | Max. 36/min |
Number of programs | 1000 |
Power supply voltage | Three-phase 200V/220V 50Hz/60Hz |
Installed plasma power supply | SUPER400PLUS/SUPER600PLUS |
With a rigid machine structure, MYNUC can achieve faster speeds and respond to a maximum rapid traverse speed of 54m/min.
Details
Gantry style, dual side drive | |
Control panel | Right-hand use (left-hand use is optional) |
Drive system | Rack and pinion |
Rail span | 4.5m/5.0m/5.5m/6.0m/6.5m 7.0m/7.5m/8.0m (9.0m or greater spans are optional) |
Effective cutting range | 3.5m/4.0m/4.5m/5.0m/ 5.5m/6.0m/6.5m/7.0m |
Cutting speed | 6m/min |
Rapid traverse speed | 54m/min |
Marking speed | Max. 36/min |
CNC unit | FANUC-300i 15" color LCD |
Memory | 1,280m (basic specification) |
Number of programs | 1000 |
Rail span | 37kg/m (with CP15 rack) or 50kg/m (with m5.5 rack) |
Power supply voltage | Three-phase 200V/220V 50Hz/60Hz |
Installed plasma power supply | SUPER400PLUS/SUPER600PLUS |
Approx. Rs 14.5 Lakh / UnitGet Latest Price
Product Details:Phase | Three Phase |
Automatic Grade | Automatic |
Brand | koike |
Tape memory length | 1280 m |
Effective cutting width | 2.1m, 2.6m, 3.1m, 3.6m |
Rapid feedrate | 24,000 mm/min |
Laser beam path | Fixed laser beam length |
Input power supply | 200VAC, 3 phase, 50/60Hz. |
Durability and advanced technology have been built into theLaser Cutting Machinesensuring dependable ease of operation. The LASERTEX is the answer for improving existing production processes and opening new opportunities to expand your business.
The LASERTEX-series cutting machines is the ultimate solution for the larger capacity and higher accuracy demands of today's industry. The LASERTEX is designed to address the increasing demand for reducing the cost of operating expenses by utilizing common-line cuttinh and unmanned operation.
Costs can be reduced significantly by operating the system unattended during night shift hours. The LASERTEX is capable of producing two shifts of operation for one shift's labor cost. A dross-free result eliminates the need for secondary cleaning operations. Common-line cutting reduces remnant scrap costs from 1% to 5%. With unmanned operation, cost of operating the machine is lower due to decreased cost of power and no operator interference.
Details
Gantry dual drive resonator on board type. | |
NC | Fanuc 180 |
Tape memory length | 1280m |
Effectice cutting width | 2.1m, 2.6m, 3.1m, 3.6m |
Effective cutting length | Rail length minus 3m. |
Rapid feedrate | 24,000 mm/min |
Laser beam path | Fixed laser beam length |
Focal point adjustment | NC controlled focus function. |
Lens holder | Drawer type - one touch exchange. |
Cutting parameter | NC cutting parameter setting function. |
Input power supply | 200VAC, 3 phase, 50/60Hz. |
Cutting thickness | 16mm (m.s.), 6mm (s.s.) |
Laser resonator | Fanuc C2000-E |
Approx. Rs 14.5 Lakh / UnitGet Latest Price
Product Details:Brand | KOIKE |
Cutting Length | Over 200-feet |
Cutting Width | 20-feet |
Power | 4 kW,6 kW |
Cutting Material | MS |
Cutting capacity for four kW machine | Up to 3/4 -inch for MS and 1/2 -inch stainless steel |
Cutting capacity for six kW machine | Up to 1-inch mild steel and 3/4 -inch stainless steel |
We are offering Laser Cutting Machinesto our clients. The KOIKE designed Lasertex uses a patented process in which the resonator is mounted to the main beam cross carriage. This then moves with the cutting/focus head. The laser beam is reflected by stationary mirrors inside an air purged Sigma box. The laser beam never changes. This allows for capabilities of 20-feet cutting width to over 200-feet of cutting length. Complete lights out operation can be achieved, which saves on energy costs and man power. Laser cutting has a very low heat affected zone and can maintain tight part tolerances versus an oxy-fuel or plasma cuts.
Approx. Rs 24 Lakh / UnitGet Latest Price
Product Details:Material | MS |
Automation Grade | Semi-Automatic |
Cutting Technique | Waterjet Cutting |
Cutting Material Thickness | Up to 8 inch |
Cutting Material | Aluminum,Armor Plate,Brass,Carpet,Copper,Glass,Granite,Leather,Marble,Mild Steel,etc. |
Brand | KOIKEJET |
Finishing | Polished,Powder Coated |
Approx. Rs 30 Lakh / NOGet Latest Price
Product Details:Cutting Widths | 5,6, and 8 foot |
Cut Lengths | 10, 12, 20, and 24 foot |
Traverse Speed | 800 IPM |
Tool Stations | Up to 4 |
Technology Used | Oxy-Fuel Cutting, Plasma Cutting, Plate Cutting |
Finishing | Polished, Powder Coated |
Explore More Products
© TOSS WELDTRONICS. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited